User Manual Q&AAnswer
Nov 01, 2024 - 01:41 AM
Cleaning and maintaining the NUCOUN VC-7 Money Counter Machine is essential for ensuring consistent and reliable performance. Here is a step-by-step guide on how to clean and maintain the machine:
1. Power off the machine: Before cleaning, make sure to turn off the power and unplug the machine from the power source.
2. Remove dust and debris: Use a soft, dry cloth or a brush to gently remove any dust or debris from the exterior of the machine. Pay attention to the bill feeding area, display screen, and sensors.
3. Clean the sensors: The NUCOUN VC-7 Money Counter Machine is equipped with UV and MG sensors for counterfeit detection. To clean these sensors, lightly dampen a lint-free cloth with water or a mild cleaning solution and gently wipe the sensors. Avoid using excessive moisture or harsh chemicals that could damage the sensors.
4. Clean the bill feeding area: If the bill feeding area becomes dirty or sticky, use a soft cloth or brush to clean it. You can also use a small amount of isopropyl alcohol on a cloth to remove any residue. Make sure to dry the area thoroughly before using the machine again.
5. Regular maintenance: In addition to cleaning, it is recommended to perform regular maintenance on the NUCOUN VC-7 Money Counter Machine. Refer to the user manual for specific instructions on maintenance tasks such as sensor calibration or firmware updates.
6. Store the machine properly: When not in use, store the machine in a clean and dry environment to prevent dust accumulation and potential damage.
Please refer to the user manual for more detailed instructions and safety precautions regarding the cleaning and maintenance of the NUCOUN VC-7 Money Counter Machine.
Add New Comment