Answer
Nov 01, 2024 - 01:33 AM
To calibrate the displays on the EX ELECTRONIX EXPRESS 5800D UV/MG Money Counter, follow these steps:
1. Power on the money counter and ensure it is in the idle state.
2. Press and hold the "Batch" button for 3 seconds until the display shows "CAL".
3. Release the "Batch" button and the display will show "CAL 0".
4. Insert a bill into the machine's hopper.
5. The display will show the denomination of the bill.
6. Press the "Batch" button to confirm the denomination.
7. The display will show "CAL 1".
8. Repeat steps 4-7 for at least 5 different denominations of bills.
9. After calibrating multiple denominations, the display will show "CAL END".
10. Calibration is now complete, and the displays should accurately present the information during the counting process.
Note: It is recommended to consult the user manual for specific instructions on display calibration for the EX ELECTRONIX EXPRESS 5800D UV/MG Money Counter, as the steps may vary slightly depending on the model or firmware version.
Add New Comment