Answer
Nov 01, 2024 - 01:31 AM
Sure! Here are the step-by-step instructions for assembling the VEVOR HRH13P Electric Pressure Washer:
1. Mounting the wheel assembly:
- Install the wheels on the rear housing and press them down.
- Install the accessories rack on the rear housing and fix four screws (M4*16mm).
2. Mounting the handle and the hose hook:
- Slide the handle onto the machine and fix four screws (M4*22mm).
- Install the hose hook on the long handle and fix four screws (M4*16mm).
3. Mounting the gun hook and power cord holder:
- Slide the gun hook A onto the upper part of the handle.
- Slide the gun hook B onto the lower part of the machine.
- Slide the power cord holder onto the right side of the machine.
4. Attach the quick lance to the gun:
- Note: When the machine is not started, align the two projections on the lance with the grooves on the gun when assembling.
5. Insert the nozzle:
- Grasp the top metal ring with your left hand and pull it downwards without releasing it.
- Insert the nozzle directly into the wand.
- Release the metal ring with your left hand to lock it in place.
6. xxxx the high-pressure hose onto the water outlet pipe:
- Push and turn (clockwise) it tight to avoid leakage.
- When the pieces are joined properly, you cannot separate the two components by pulling straight out from the water outlet.
7. Attach the other high-pressure hose to the gun:
- After the high-pressure hose is connected, check the connection by gently pulling on the hose to ensure it stays connected.
- Push the lock button and pull to detach the high-pressure hose. For detaching the hose easily, please pull the trigger to drain water from the wand when the operation is completed and the switch is in the "OFF/0" position.
8. Attach the garden hose:
- Connect one end of the home garden hose to the adapter and the other end to the water source.
- Warning: The appliance is intended to be used at a temperature above 0 degrees.
9. Connect to the power supplier:
- Plug the pressure washer into the power outlet.
- Press the TEST button, and if the power is cut and the indicator fades, do not use the pressure washer. Press the RESET button to illuminate the indicator and power on for use.
These are the basic steps for assembling the VEVOR HRH13P Electric Pressure Washer. For more detailed instructions and safety precautions, please refer to the user manual provided with the product.
Add New Comment