User Manual Q&AAnswer
Nov 01, 2024 - 01:09 AM
To pair the remote control with the Syantek BHC1801-3 Wireless Remote Control Light Switch, please follow these steps:
1. Insert batteries into the RF remote control, ensuring they are correctly inserted according to the polarity markings.
2. Make sure the power to the light switch is turned on.
3. Stand within the specified wireless range of the light switch.
4. Press and hold the "Pair" or "Sync" button on the light switch for a few seconds until the LED indicator starts flashing.
5. Within 10 seconds of pressing the "Pair" or "Sync" button on the light switch, press and hold any button on the remote control until the LED indicator on the light switch stops flashing.
6. Release the button on the remote control and wait for the LED indicator on the light switch to stop flashing and remain solid.
7. The remote control is now paired with the Syantek BHC1801-3 light switch. You can test the remote control by pressing the buttons to turn the lights on/off or adjust brightness.
Note: If the pairing process is unsuccessful, repeat the steps above, ensuring that you are within the specified wireless range and that the batteries in the remote control are functional.
Add New Comment