Answer
Nov 01, 2024 - 01:07 AM
Installing the ANKO 163 LED Indicator Weather Resistant Receptacle is a straightforward process. Here is a step-by-step guide:
1. Turn off the power: Before starting the installation, turn off the power at the circuit breaker to ensure your safety. Use a voltage tester to confirm that the power is off.
2. Remove the old receptacle (if applicable): If you are replacing an existing receptacle, remove it by unscrewing the mounting screws and disconnecting the wires.
3. Prepare the electrical box: Ensure that the electrical box is suitable for outdoor use and in good condition. Clean the box and remove any debris or old gaskets.
4. Connect the wires: Follow the provided installation instructions to connect the wires to the ANKO 163 receptacle. Typically, you will connect the black (hot) wire to the brass-colored xxxx , the white (neutral) wire to the silver-colored xxxx , and the green or bare copper (ground) wire to the green xxxx .
5. Mount the receptacle: Insert the ANKO 163 receptacle into the electrical box and align it with the mounting holes. Secure it in place using the provided mounting screws. Make sure the receptacle is level and flush with the wall.
6. Test the installation: After the receptacle is securely mounted, turn on the power at the circuit breaker. Use a voltage tester to confirm that the power is restored to the receptacle.
7. Verify LED indicator functionality: Plug in a device or use a voltage tester to verify that the LED indicator on the ANKO 163 receptacle is functioning correctly. The green LED should indicate that power is on, while no LED indicates that power is off.
Note: It is recommended to have the receptacle installed by a qualified electrician if you are unsure or uncomfortable with electrical work. Always adhere to local electrical codes and regulations during installation.
For more detailed instructions and safety precautions, refer to the ANKO 163 LED Indicator Weather Resistant Receptacle user manual provided with the product.
Add New Comment