User Manual Q&AAnswer
Nov 01, 2024 - 01:01 AM
To connect the junlit YSP102 Smart Plug Outlet to your Wi-Fi network, follow these steps:
1. Download the "Smart Life" application on your smartphone.
2. Register or log in to the app using your phone number.
3. Make sure the switch has connected to electricity and your phone is connected to the Wi-Fi router.
4. Open the Smart Life app and tap the "+" icon on the top right corner to select the device.
5. Choose "Wall Switch" from the device options.
6. There are two configuration modes available: Default Configuration Mode and AP Mode.
- Default Configuration Mode:
- Press and hold the manual switch on the smart plug for 5 seconds until the blue indicator light blinks quickly.
- Tap "Confirm indicator rapidly blink" in the app.
- Enter your Wi-Fi password and wait for the connection to complete.
- AP Mode:
- Tap "AP Mode" in the top right corner of the app.
- Press and hold the manual switch on the smart plug for 5 seconds until the blue indicator light blinks quickly.
- Then press and hold for 3 seconds again until the indicator light blinks slowly.
- Tap "Confirm indicator slowly blink" in the app.
- Enter your Wi-Fi password and connect to the "SmartLife-xxxx" network in your phone's WLAN settings.
- Go back to the app and continue adding the device, waiting for the connection to complete.
Note: The junlit YSP102 Smart Plug Outlet only supports a 2.4G network. If you have connected to a 5G network, please disconnect it before configuring the smart plug.
For more detailed instructions and troubleshooting, refer to the junlit YSP102 Remote Control Smart Plug Outlet Instruction Manual.
Add New Comment