Answer
Nov 01, 2024 - 12:47 AM
To adjust the speed of the VEVOR R7171-150 Buffer Polisher, follow these steps:
1. Locate the speed regulator on the tool. It is labeled as "A" in the diagram provided in the user manual.
2. Turn the speed regulator wheel clockwise or counterclockwise to adjust the speed. The speed can be adjusted from low to high, with "MIN" representing the lowest speed and "6" representing the highest speed.
3. Start with the speed regulator wheel in the "MIN" position for lower speed. If needed, gradually increase the speed while the tool is running to find the optimal working speed for the specific material and polishing task.
4. The user manual recommends conducting practical trials to determine the optimal working speed for different materials.
Note: It is important to refer to the user manual for specific instructions and safety precautions when adjusting the speed of the buffer polisher.
Add New Comment