User Manual Q&AAnswer
Nov 01, 2024 - 12:26 AM
Calibrating the GTech GL-6300L Portable Bench Scale is a straightforward process. Here are the step-by-step instructions:
1. Ensure that the scale is placed on a stable and level surface.
2. Power on the scale using the designated power source (AC adapter or batteries).
3. Wait for the scale to initialize and display "0.00" or "0.0000" on the screen.
4. Locate the calibration button or function on the scale. Refer to the user manual for the specific location of this button.
5. Press and hold the calibration button until the display shows a calibration prompt or indicator.
6. Place a known weight on the scale's weighing platform. It is recommended to use a weight that is within the scale's maximum weight capacity.
7. Once the known weight is placed on the scale, release the calibration button.
8. The scale will now calibrate itself based on the known weight. Wait for the calibration process to complete, which is usually indicated by a beep or a specific message on the display.
9. Remove the known weight from the weighing platform.
10. The scale is now calibrated and ready for use. Test the accuracy by placing various items on the scale and verifying that the measurements are within the expected range.
Please note that the above instructions are general guidelines for calibration. For specific instructions and any additional features or considerations, refer to the user manual provided with the GTech GL-6300L Portable Bench Scale.
Add New Comment