Answer
Oct 31, 2024 - 11:31 PM
To load labels into the ZEBRA GC420t Desktop Thermal Printer, follow these steps:
1. Open the printer cover by lifting the release latch on the top of the printer.
2. Locate the label roll holders on the inside of the printer. Adjust the holders to match the width of your label roll.
3. Place the label roll onto the holders, ensuring that the labels feed from the bottom of the roll.
4. Thread the labels through the label guides, making sure they are aligned properly.
5. Pull the labels through the printer and close the printer cover, ensuring that the labels are positioned correctly.
6. Press the Feed button on the front panel of the printer to advance the labels to the correct starting position.
For more detailed instructions and illustrations, please refer to the User Guide provided with the printer. You can access the User Guide by clicking on the "User Guide" link above.
Add New Comment