Answer
Oct 31, 2024 - 10:51 PM
To install the Leviton T5320-W Straight Blade Tamper Resistant Receptacle, follow these steps:
1. Turn off power: Before installation, ensure that the power to the outlet is turned off at the circuit breaker.
2. Remove old outlet: If replacing an existing outlet, carefully remove it from the electrical box.
3. Connect wires: Follow the included installation instructions to connect the wires to the corresponding terminals. Make sure to connect the hot (black), neutral (white), and ground (green or bare) wires correctly.
4. Secure receptacle: Once the wires are connected, secure the receptacle in place using the provided mounting screws. Ensure that the receptacle is level and flush with the wall.
5. Turn on power: Restore power at the circuit breaker and test the receptacle to ensure proper functionality. Use a voltage tester to confirm that power is reaching the receptacle.
It is important to note that electrical work should be performed by a qualified electrician in accordance with local electrical codes and regulations. Always turn off the power at the circuit breaker or fuse box before installing or replacing a receptacle to avoid the risk of electrical shock.
Add New Comment