Answer
Oct 31, 2024 - 10:49 PM
To connect the BN-LINK BNC-60-U133T WiFi Smart Plug Outlet to your WiFi network, please follow these steps:
1. Download the manufacturer's mobile app: Start by downloading the mobile app provided by BN-LINK. You can find the app in your device's app store by searching for the manufacturer's name or the specific model of the smart plug.
2. Create an account: Open the app and create a new account if prompted. This account will be used to manage and control your smart plug.
3. Plug in the smart plug: Plug the BN-LINK BNC-60-U133T WiFi Smart Plug Outlet into a standard electrical outlet.
4. Enable pairing mode: Press and hold the push button on the smart plug for a few seconds until the LED indicator starts flashing rapidly. This indicates that the smart plug is in pairing mode.
5. Connect to the smart plug: Open the mobile app and follow the on-screen instructions to add a new device. This usually involves selecting the appropriate device model and following the prompts to connect to the smart plug's WiFi network.
6. Connect to your WiFi network: Once connected to the smart plug's WiFi network, the app will guide you through the process of connecting the smart plug to your home WiFi network. You will need to enter your WiFi network's SSID (name) and password.
7. Complete setup: After entering your WiFi network information, the smart plug will attempt to connect to your WiFi network. Once successfully connected, you should see a confirmation message in the app.
8. Rename and organize: After successfully connecting the smart plug to your WiFi network, you can rename the device and organize it into rooms or groups within the app for easier management and control.
Please note that these steps are general guidelines, and the exact process may vary slightly depending on the specific mobile app and firmware version of the BN-LINK BNC-60-U133T WiFi Smart Plug Outlet. For detailed instructions and troubleshooting tips, please refer to the user manual provided with the product.
Add New Comment