User Manual Q&AAnswer
Oct 31, 2024 - 10:47 PM
To program the Syantek BH9912U remote control to operate multiple socket receivers, please follow the steps below:
1. Make sure all the socket receivers and the remote control are within range of each other.
2. Press and hold the programming button on one of the socket receivers until the indicator light starts to blink.
3. Release the programming button and press the "ON" or "OFF" button on the remote control for the desired socket receiver.
4. The programming/paring is successful when the indicator light on the socket receiver stops blinking.
5. Repeat steps 2-4 for each additional socket receiver you want to program with the remote control.
Note: The Syantek BH9912U remote control has the capability to operate multiple socket receivers, allowing you to control multiple lighting fixtures with a single remote control.
Add New Comment