Answer
Oct 31, 2024 - 10:45 PM
To pair the remote control with the TESSAN TS-WRC01-US Wireless Remote Light Switch, please follow these steps:
1. Make sure the light switch is connected to a power source and turned on.
2. Locate the pairing button on the back of the light switch. It is usually a small button labeled "Pair" or "Sync."
3. Press and hold the pairing button on the light switch for about 5 seconds until the LED indicator starts flashing.
4. Take the remote control and press and hold the "Pair" or "Sync" button on the back of the remote for about 5 seconds until the LED indicator on the remote starts flashing.
5. Release both buttons and wait for a few seconds. The LED indicators on both the light switch and the remote control should stop flashing and remain solid, indicating successful pairing.
6. Test the remote control by pressing the ON or OFF button to control the lights connected to the switch. The lights should respond accordingly.
If the pairing process is unsuccessful, try the following troubleshooting steps:
- Ensure that the batteries in the remote control are properly inserted and have sufficient charge.
- Make sure you are within the operating range of the remote control and the light switch.
- Check for any potential sources of interference, such as other wireless devices or electronic appliances, and move them away from the remote control and the light switch.
- If the issue persists, refer to the user manual or contact TESSAN customer support for further assistance.
Please note that the exact pairing process may vary slightly depending on the specific model of the TESSAN TS-WRC01-US Wireless Remote Light Switch. Always refer to the user manual provided with your product for the most accurate and detailed instructions.
Add New Comment