User Manual Q&AAnswer
Oct 31, 2024 - 10:41 PM
To pair the remote control with the G-Homa R2031 Wireless Remote Control Switch Plug, please follow these steps:
1. Ensure that the switch plug is properly connected to a power source and turned on.
2. Make sure the batteries in the remote control are installed correctly and have sufficient power. If needed, replace the batteries with a new set.
3. Stand within the specified range for the remote control switch plug.
4. On the switch plug, locate the pairing button. This button is usually labeled or indicated in the user manual.
5. Press and hold the pairing button on the switch plug for a few seconds until the indicator light starts flashing rapidly.
6. On the remote control, press and hold any button until the indicator light on the switch plug stops flashing and remains solid.
7. Release the button on the remote control and wait for a few seconds. The remote control should now be paired with the switch plug.
8. Test the remote control by pressing the buttons to turn the connected devices on/off. If the devices respond to the remote control commands, the pairing process was successful.
If you encounter any issues during the pairing process, refer to the user manual for specific instructions or troubleshooting steps.
Add New Comment