Answer
Oct 31, 2024 - 10:39 PM
To install the ELEGRP 2003A-BL10-ELE-WP Matte Black Electrical Wall Receptacle, please follow these steps:
1. Turn off power to the electrical outlet: Before starting the installation process, ensure that the power supply to the electrical outlet is turned off. You can do this by switching off the circuit breaker or fuse box that controls the outlet.
2. Remove the existing outlet cover and unscrew the outlet: Use a screwdriver to remove the existing outlet cover and unscrew the outlet from the electrical box. Take note of the wire connections to ensure proper reconnection later.
3. Connect the wires to the corresponding terminals on the new receptacle: The ELEGRP 2003A-BL10-ELE-WP Matte Black Electrical Wall Receptacle should have labeled terminals for the wires. Connect the black (hot) wire to the brass or gold-colored terminal, the white (neutral) wire to the silver-colored terminal, and the green or bare copper (ground) wire to the green-colored terminal. Use wire nuts or terminal screws to secure the connections.
4. xxxx the receptacle back into the electrical box: Once the wires are securely connected, carefully push the wires back into the electrical box. Align the xxxx holes on the receptacle with the holes in the electrical box and use screws to secure the receptacle in place.
5. Attach the new cover plate provided in the package: Place the new cover plate over the receptacle and align the xxxx holes. Use the screws provided to attach the cover plate securely.
It is important to note that electrical work should be done by a qualified electrician if you are unsure about the installation process or if you have any concerns regarding safety. Always follow the manufacturer's instructions and guidelines for proper installation.
Please refer to the ELEGRP 2003A-BL10-ELE-WP Matte Black Electrical Wall Receptacle user manual for any specific instructions or additional information related to the installation process.
Add New Comment