User Manual Q&AAnswer
Oct 31, 2024 - 10:34 PM
Installing the Leviton 689-W Residential Grade Duplex Receptacle is a relatively straightforward process. Here is a step-by-step guide to help you with the installation:
1. Safety First: Before starting the installation, turn off the power to the electrical outlet at the circuit breaker. This ensures your safety during the installation process.
2. Remove the Old Outlet (if applicable): If you are replacing an existing outlet, carefully remove it from the electrical box using a screwdriver.
3. Connect the Wires: Follow the wiring instructions provided in the installation manual or consult a qualified electrician to ensure proper connections. Connect the wires to the corresponding terminals on the receptacle. Typically, the black wire (hot) connects to the brass-colored terminal, the white wire (neutral) connects to the silver-colored terminal, and the green or bare wire (ground) connects to the green xxxx or grounding terminal.
4. Attach the Receptacle: Once the wires are securely connected, carefully attach the Leviton 689-W receptacle to the electrical box using the provided screws. Ensure that the receptacle is aligned properly and fits snugly against the wall.
5. Power On and Test: After securely attaching the receptacle, turn the power back on at the circuit breaker. Use a voltage tester to confirm that the power is flowing to the receptacle. Once confirmed, you can test the receptacle by plugging in a device to ensure it is functioning correctly.
It's important to note that if you are unsure or uncomfortable with any step of the installation process, it is recommended to hire a qualified electrician to ensure proper installation and safety.
Please refer to the installation instructions provided with the Leviton 689-W receptacle for any specific details or variations that may apply to your specific installation scenario.
Add New Comment