User Manual Q&AAnswer
Oct 31, 2024 - 10:30 PM
To adjust the amperage on the TOOLIOM TL-200T Digital Inverter Welder TIG, follow these steps:
1. Locate the Amperage Control xxxx on the front panel of the welder. It is marked with the letter "A".
2. Turn the Amperage Control xxxx clockwise to increase the amperage or counterclockwise to decrease the amperage. Refer to the Data Chart provided in the user manual for the recommended amperage settings based on the material thickness and type.
3. Set the amperage to the appropriate level for the material you are welding. It is important to use the correct amperage to ensure proper weld quality and penetration.
4. Once you have set the desired amperage, you can begin welding. Make sure to follow all safety precautions and guidelines outlined in the user manual.
Note: If you are using the foot pedal for amperage control, the amperage will be controlled by the foot pedal instead of the Amperage Control xxxx on the front panel.
Add New Comment