User Manual Q&AAnswer
Oct 31, 2024 - 10:21 PM
To connect the NETUM C990 Mini 2D Barcode Scanner to your device, you have three options: USB cable, 2.4G receiver, or Bluetooth. Here are the steps for each connection method:
1. Working via USB Cable:
- Connect the scanner to your device using a USB cable.
- If you are using a US keyboard, it should be plug-and-play. If you are using a different type of keyboard, you may need to configure the keyboard language before using the scanner.
2. Working via a 2.4G receiver:
- Plug the USB receiver into your computer.
- If you are using a US keyboard, it should be plug-and-play. If you are using a different type of keyboard, you may need to configure the keyboard language before using the scanner.
3. Working via Bluetooth:
- Refer to the "Bluetooth pairing" section of the user manual for detailed instructions on pairing the scanner with your device.
- Once the Bluetooth connection is established, position the cursor on the place where you want to upload the scanned codes, and you can start working. Note that the scanner defaults to the keyboard mode, so if you are using a different type of keyboard, configure the keyboard language before using the scanner.
Please refer to the user manual for additional information and troubleshooting tips specific to your device and operating system.
Add New Comment