User Manual Q&AAnswer
Oct 31, 2024 - 10:18 PM
To connect the NETUM DS5000 Wireless 1D Barcode Scanner to your device, please follow these steps:
1. Ensure that your device (computer, smartphone, or tablet) has Bluetooth functionality and is compatible with the scanner.
2. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
3. On your device, navigate to the Bluetooth settings menu.
4. Enable Bluetooth on your device if it is not already enabled.
5. On the scanner, press and hold the trigger button for 5 seconds until the LED indicator starts blinking.
6. In the Bluetooth settings menu on your device, search for available devices.
7. Locate the scanner in the list of available devices and select it to initiate the pairing process.
8. If prompted, enter the PIN code (usually 0000 or 1234) to complete the pairing process.
9. Once the pairing is successful, the LED indicator on the scanner will stop blinking and remain solid.
10. The scanner is now connected to your device via Bluetooth. You can start using it to scan barcodes.
For more detailed instructions and troubleshooting tips, please refer to the user manual included in the package.
Add New Comment