Answer
Oct 31, 2024 - 10:13 PM
To connect the NETUM C830 1D Laser Barcode Scanner to your device, you have three options: Bluetooth, 2.4G Wireless, or Wired connection. Here are the step-by-step instructions for each connection method:
Bluetooth Connection:
1. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
2. Enable Bluetooth on your laptop by going to the settings or control panel.
3. On the scanner, press and hold the Bluetooth button until the LED indicator starts to flash.
4. On your laptop, search for available Bluetooth devices and select the scanner from the list.
5. Follow any additional prompts or pairing codes that may appear on your laptop's screen to complete the connection.
2.4G Wireless Connection:
1. Connect the USB receiver to your laptop's USB port.
2. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
3. On the scanner, press and hold the 2.4G Wireless button until the LED indicator starts to flash.
4. The scanner will automatically pair with the USB receiver. Wait for the LED indicator to stop flashing, indicating a successful connection.
Wired Connection:
1. Connect one end of the USB cable to the scanner and the other end to your laptop's USB port.
2. The scanner should be automatically recognized by your laptop as a USB input device.
3. Wait for the driver installation process to complete, if required.
Once the scanner is connected to your laptop, it should be ready to use for inventory management. Refer to the user manual for further details on scanning and data upload processes.
Note: Make sure to check the compatibility of the NETUM C830 with your specific laptop and operating system before attempting to connect.
Add New Comment