User Manual Q&AAnswer
Oct 31, 2024 - 10:12 PM
To connect the NETUM R2 Bluetooth Barcode Scanner to your device, follow these steps:
1. Ensure that the scanner is charged or connected to a power source.
2. Turn on the scanner by pressing and holding the power button until the LED indicator lights up.
3. On your device, enable Bluetooth and make sure it is discoverable.
4. Press and hold the scanner's Bluetooth button until the LED indicator starts flashing.
5. On your device, search for available Bluetooth devices.
6. Select the NETUM R2 from the list of available devices.
7. If prompted, enter the PIN code "0000" to pair the scanner with your device.
8. Once the pairing is successful, the LED indicator on the scanner will stop flashing and remain steady.
9. Open a barcode scanning application or any application that requires barcode input on your device.
10. Start scanning barcodes by aiming the scanner at the barcode and pressing the trigger button.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the scanner.
Add New Comment