Answer
Oct 31, 2024 - 09:44 PM
To connect the ELEGRP PQR20 Waterproof WIFI Smart Plug to your WIFI network, follow these steps:
1. Ensure that your mobile phone's Wi-Fi is turned on and connected to a 2.4GHz Wi-Fi network.
2. If your Wi-Fi router supports both the 2.4GHz and 5GHz dual bands, make sure their Wi-Fi names (SSID) are different or turn off the 5GHz band from the router's wireless settings. Connect your phone to the 2.4GHz Wi-Fi network.
3. Make sure your mobile phone's Bluetooth is turned on.
4. Prepare the Wi-Fi password of the network your mobile phone is connected to.
5. Open the App and register an account to log in.
6. Tap the icon "Add Device" in the middle or the add icon "+" on the top right of the homepage.
You can then choose to add the device by auto pairing or manually.
For auto pairing:
1. Power on the smart device and check if the indicator light is blinking, indicating it is in pairing mode. The pairing mode lasts for 3 minutes.
2. If the indicator light is blinking, the smart device will be automatically discovered.
3. If the indicator light is not blinking, press and hold the switch button of the smart device for 6 seconds until the indicator light starts blinking.
4. Add the device from the discovered device list.
5. Select the 2.4GHz Wi-Fi network that your mobile phone is connected to. Enter the password for that network and wait a few seconds until the device is successfully added.
For manual pairing:
1. Power on the smart device and select the device type from the list.
2. Follow the instructions in the App step by step to ensure the indicator light starts blinking, indicating it is in pairing mode. The pairing mode lasts for 3 minutes.
3. If the indicator light is blinking fast, choose Bluetooth Mode or EZ Mode from the top right.
4. If the indicator light is blinking slow, choose AP Mode instead.
5. Select the 2.4GHz Wi-Fi network that your mobile phone is connected to. Enter the password for that network and wait a few seconds until the device is successfully added.
Please note that the instructions may vary slightly depending on the version of the App you are using.
Add New Comment