Answer
Oct 31, 2024 - 09:40 PM
To connect the Geeni GN-OW Weatherproof Wi-Fi Smart Plug to your Wi-Fi network, follow these steps:
1. Make sure the indicator light on the smart plug is flashing rapidly blue, indicating that it is ready to connect.
2. Open the Geeni app on your mobile device.
3. On the Devices screen, click the "+" button on the top corner to add a new device.
4. Choose "Smart Power" from the options.
5. If the indicator light is not flashing rapidly blue, press and hold the button on the smart plug for 3 seconds until the indicator light starts flashing rapidly.
6. In the Geeni app, click "Next Step" to proceed.
7. Enter your Wi-Fi network name (SSID) and password.
8. The Geeni app will attempt to connect your smart plug to your Wi-Fi network.
9. Once the connection is successful, you can control the smart plug remotely using the Geeni app.
Note: If you encounter any issues during the setup process, make sure you have entered the correct Wi-Fi password and that your Wi-Fi router is online and within range. You can also try resetting the smart plug by pressing and holding the button for 3 seconds until the indicator light starts flashing rapidly.
Add New Comment