User Manual Q&AAnswer
Oct 31, 2024 - 05:30 AM
To connect the Wasp WWS250i 2D Pocket Barcode Scanner to your device, please follow these steps:
1. Ensure that your device (laptop or desktop) is powered on and has Bluetooth capabilities.
2. Turn on the Wasp WWS250i scanner by pressing and holding the power button located on the scanner until the LED indicator lights up.
3. On your device, navigate to the Bluetooth settings. This can usually be found in the system settings or control panel.
4. Enable Bluetooth on your device if it is not already enabled.
5. On the Wasp WWS250i scanner, press and hold the Bluetooth button until the LED indicator starts flashing.
6. On your device, search for available Bluetooth devices. The Wasp WWS250i scanner should appear in the list of available devices.
7. Select the Wasp WWS250i scanner from the list on your device to initiate the pairing process.
8. If prompted, enter the PIN code "0000" on your device to complete the pairing process.
9. Once the pairing is successful, the LED indicator on the Wasp WWS250i scanner will stop flashing and remain solid.
10. Your Wasp WWS250i scanner is now connected to your device via Bluetooth. You can start using it to scan barcodes.
For more detailed instructions and troubleshooting information, please refer to the user manual provided with the product.
Add New Comment