Answer
Oct 31, 2024 - 05:21 AM
To connect the Metrologic MS9500 Voyager Barcode Handheld Scanner to your computer, follow these steps:
1. Check the package contents: Ensure that the scanner and the user's guide are included in the box.
2. Determine the connectivity options: The Metrologic MS9500 Voyager Barcode Handheld Scanner typically supports various connectivity options, such as USB and RS-232. Check the product specifications or the user's guide to identify the supported connectivity options for your specific model.
3. Choose the appropriate cable: Depending on the connectivity option you intend to use, select the corresponding cable. For example, if you plan to connect via USB, you will need a USB cable compatible with the scanner.
4. Connect the cable: Plug one end of the cable into the appropriate port on the scanner. The port location may vary depending on the model, so refer to the user's guide for the exact location. Plug the other end of the cable into an available port on your computer.
5. Install any necessary drivers: In most cases, the Metrologic MS9500 Voyager Barcode Handheld Scanner is plug-and-play, meaning it should work without the need for additional drivers. However, if your computer prompts you to install drivers, follow the on-screen instructions or refer to the user's guide for guidance on driver installation.
6. Test the connection: Once the scanner is connected, open a barcode scanning application or software on your computer. Aim the scanner at a barcode and press the trigger button (usually located on the scanner handle) to initiate the scanning process. If the scanner successfully reads the barcode and transmits the data to your computer, the connection is established and working correctly.
Note: For more detailed instructions and troubleshooting tips, refer to the user's guide provided with the Metrologic MS9500 Voyager Barcode Handheld Scanner. The user's guide contains comprehensive information on setup, operation, and troubleshooting for the scanner
Add New Comment