User Manual Q&AAnswer
Oct 31, 2024 - 05:15 AM
To install the IRIS Executive 2 Portable Scanning Mouse application, please follow these steps:
1. Make sure you have the required administration rights on your computer to do the installation.
2. Install Cardiris™ before installing the IRIS Executive 2 Mouse application. This is important as the mouse will not be able to send scanned documents to Cardiris™ if it is not installed first.
3. Go to the IRISlink website at www.irislink.com/start.
4. Scroll down to the IRIS Executive 2 Portable Scanning Mouse section.
5. Select the version you acquired and click on "Getting Started."
6. Click on "Start now."
7. Complete the form and click on "Register now."
8. Select the required Operating System.
9. Click on "Download" to download the software.
10. Locate the downloaded software file and run the installation file.
11. Follow the on-screen instructions to install Cardiris™ Pro first.
12. Return to the installation menu and click on "IRIS Executive 2 Portable Scanning Mouse Executive."
13. Follow the on-screen instructions to complete the installation.
14. Unplug your regular mouse and plug in the IRIS Executive 2 Portable Scanning Mouse into a free USB port (USB 2.0 or higher). The driver will be installed automatically within a few seconds. Note: It is recommended to plug the mouse directly into your PC to avoid any performance issues.
Once the installation is complete, you can start using the IRIS Executive 2 Portable Scanning Mouse for scanning documents. For further assistance or troubleshooting, you can consult the Frequently Asked Questions or contact Technical Support at www.irislink.com/support.
Add New Comment