Answer
Oct 31, 2024 - 04:48 AM
To connect the Fujitsu ScanSnap S1100 USB Mobile Scanner to your computer, please follow these steps:
1. Ensure that your computer is powered on and running.
2. Locate the USB cable included in the box with the scanner.
3. Connect one end of the USB cable to the USB port on the scanner.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the scanner is connected to your computer, it should be automatically recognized by the operating system.
6. If prompted, install any necessary drivers or software for the scanner. You can refer to the Operator's Guide for instructions on installing the software.
7. Once the scanner is connected and recognized by your computer, you can start scanning documents using the scanning software provided with the scanner.
For more detailed instructions and troubleshooting information, please refer to the Operator's Guide provided with the scanner. The guide contains comprehensive information on setting up and using the Fujitsu ScanSnap S1100 USB Mobile Scanner.
Add New Comment