User Manual Q&AAnswer
Oct 31, 2024 - 04:43 AM
To connect the Canon MF113w Multifunction Laser Printer to your wireless network, please follow these steps:
1. Ensure that your wireless router is turned on and functioning properly.
2. On the printer's control panel, navigate to the "Settings" or "Setup" menu.
3. Select the "Network Settings" or "Wireless LAN Setup" option.
4. Choose the "Wireless LAN Setup" option and then select "Standard Setup."
5. The printer will search for available wireless networks. When the list of networks appears, select your network from the list.
6. If your network is password-protected, you will be prompted to enter the network password. Use the printer's control panel or the on-screen keyboard to enter the password.
7. After entering the password, select "OK" or "Connect" to establish the connection.
8. The printer will attempt to connect to your wireless network. Once the connection is established, you will see a confirmation message on the printer's display.
9. To verify the successful connection, you can print a network configuration page from the printer's control panel. Refer to the user manual for instructions on how to print this page.
Note: The above steps are general guidelines, and the exact process may vary slightly depending on the printer's firmware version and user interface. For detailed instructions specific to your printer model, please refer to the "Wireless LAN Setup" section in the Canon MF113w Multifunction Laser Printer User's Guide.
Add New Comment