Answer
Oct 31, 2024 - 04:41 AM
To pair the Zebra RS419 Wearable Ring Scanner with your device, please follow these steps:
1. Ensure that the scanner is charged or has fresh batteries installed.
2. Turn on your device (laptop or desktop) and make sure it is within range of the scanner.
3. On your device, go to the Bluetooth settings and enable Bluetooth.
4. Press and hold the power button on the scanner for a few seconds until the LED indicator starts flashing.
5. On your device, search for available Bluetooth devices. The scanner should appear in the list of available devices as "Zebra RS419" or a similar name.
6. Select the scanner from the list to initiate the pairing process.
7. If prompted, enter a PIN or passkey to complete the pairing. The default passkey for the RS419 is usually "0000" (four zeros).
8. Once the pairing is successful, the LED indicator on the scanner will stop flashing and remain solid.
9. Test the connection by opening a barcode scanning application or a text editor on your device and scan a barcode. The scanned data should appear on the screen.
Please note that the exact pairing process may vary slightly depending on your device's operating system and Bluetooth settings. For more detailed instructions and troubleshooting tips, refer to the user guide provided with the Zebra RS419 Wearable Ring Scanner.
Add New Comment