User Manual Q&AAnswer
Oct 31, 2024 - 04:00 AM
To install the Leviton GUAC1-W USB Charger Smart Lock on your door, follow these steps:
1. Gather the necessary tools and materials: You will need a screwdriver, wire strippers (if required for electrical wiring), and the included mounting hardware.
2. Turn off the power: Before starting the installation, turn off the power to the electrical circuit where the smart lock will be installed. This ensures your safety during the installation process.
3. Remove the existing outlet or switch: If there is an existing outlet or switch in the desired location, carefully remove it from the wall using a screwdriver. Make sure to disconnect any electrical wiring properly.
4. Prepare the wiring: If the smart lock requires electrical wiring, follow the manufacturer's instructions for proper wiring connections. If you are unsure or uncomfortable with electrical work, it is recommended to hire a qualified professional.
5. Mount the smart lock: Use the provided mounting hardware to attach the smart lock to the wall or door. Ensure that it is securely fastened and aligned properly.
6. Connect the wiring: If applicable, connect the electrical wiring according to the manufacturer's instructions. Make sure to follow local electrical codes and regulations.
7. Test the smart lock: Once the installation is complete, restore power to the circuit and test the smart lock to ensure it is functioning correctly. Follow the manufacturer's instructions for testing and setup.
Note: It is important to follow the manufacturer's installation instructions precisely and, if necessary, consult with a qualified professional to ensure a proper and safe installation.
Add New Comment