Answer
Oct 31, 2024 - 03:33 AM
To connect the NETUM E950 Barcode Scanner to your device, follow these steps:
1. Ensure that the scanner is charged or connected to a power source.
2. Turn on the barcode scanner by pressing and holding the power button until the LED indicator lights up.
3. On your device, enable Bluetooth if it's not already enabled. Go to the Bluetooth settings menu.
4. On the barcode scanner, press and hold the Bluetooth button until the LED indicator starts flashing.
5. On your device, search for available Bluetooth devices. The scanner should appear as "NETUM E950" or a similar name.
6. Select the scanner from the list of available devices on your device's Bluetooth settings menu.
7. If prompted, enter the PIN code "0000" or "1234" to pair the scanner with your device.
8. Once the pairing is successful, the LED indicator on the scanner will stop flashing and remain solid.
9. Open a barcode scanning application or any application that requires barcode scanning on your device.
10. Start scanning barcodes by aiming the scanner at the barcode and pressing the trigger button or using the continuous scanning mode.
Note: The specific steps may vary slightly depending on your device's operating system and version. Refer to your device's user manual for more detailed instructions on Bluetooth pairing.
For more information and troubleshooting tips, please refer to the NETUM E950 Bluetooth 2D Barcode Scanner User Manual provided with your product.
Add New Comment