User Manual Q&AAnswer
Oct 31, 2024 - 03:04 AM
To connect the Honeywell 1602g Pocket Scanner to your device, please follow the steps below:
1. Ensure that your device has Bluetooth functionality and is compatible with the scanner. Refer to the user manual or product specifications of your device to confirm compatibility.
2. Turn on the Honeywell 1602g Pocket Scanner by pressing and holding the power button until the LED indicator lights up.
3. On your device, go to the Bluetooth settings and enable Bluetooth.
4. On the scanner, press and hold the Bluetooth button until the LED indicator starts flashing blue, indicating that it is in pairing mode.
5. On your device, search for available Bluetooth devices. The scanner should appear as "Honeywell 1602g" or a similar name.
6. Select the scanner from the list of available devices on your device's Bluetooth settings.
7. If prompted, enter the PIN code "0000" or "1234" to pair the scanner with your device.
8. Once the pairing is successful, the LED indicator on the scanner will turn solid blue, indicating a successful connection.
9. Open a barcode scanning application or any application that requires barcode scanning on your device.
10. Start scanning barcodes by aiming the scanner at the barcode and pressing the trigger button on the scanner.
Please note that the above steps are general guidelines, and the specific steps may vary depending on your device and operating system. For detailed instructions and troubleshooting, please refer to the user's guide provided with the Honeywell 1602g Pocket Scanner.
Add New Comment