Answer
Oct 31, 2024 - 02:59 AM
To program a frequency into a memory channel on the Uniden BC365CRS scanner, follow these steps:
1. Press the E/PGM button to enter the Program mode. The scanner will display the PGM icon.
2. If the current channel is not the one you want to program, enter the channel number using the numeric keys, then press the HOLD button.
3. Enter the frequency you want to program, including the decimal point, using the numeric keys.
4. Press the E/PGM button to store the frequency into the selected channel.
5. To program another channel, press the ▲ or ▼ button to select the desired channel, then repeat steps 3 and 4.
6. To exit Program mode, press the HOLD or SCAN button, or change the scanner's mode.
Note: If you enter a frequency that is already stored in a different channel, the scanner will display the channel where the frequency is already stored. If you still want to store the frequency, press the E/PGM button again.
For more detailed instructions and information, please refer to the Uniden BC365CRS 500-Channel Clock/ FM Radio Scanner Owner’s Manual.
Add New Comment