User Manual Q&AAnswer
Oct 31, 2024 - 02:18 AM
Refilling the ink tanks on the Epson ET-2750 Supertank Printer is a simple process. Please follow the steps below:
1. Make sure the printer is turned on and the ink tank cover is closed.
2. Locate the ink tank compartment on the front of the printer. The ink tanks are visible through a transparent window.
3. Identify the color of the ink tank that needs to be refilled. Each ink tank has a corresponding color label (Cyan, Magenta, Yellow, and Black).
4. Gently lift the ink tank cover to access the ink tanks.
5. Take the appropriate color ink bottle and remove the cap.
6. Align the ink bottle tip with the corresponding ink tank and carefully insert it into the tank's opening.
7. Squeeze the ink bottle gently to start refilling the tank. Take care not to squeeze too hard or overfill the tank.
8. Continue squeezing the ink bottle until the ink level reaches the maximum fill line on the tank. It is important not to exceed this line.
9. Once the tank is filled, remove the ink bottle from the tank and securely close the ink bottle cap.
10. Repeat the process for any other ink tanks that need to be refilled.
11. After refilling all the necessary ink tanks, close the ink tank cover.
12. Wait for a few minutes to allow the ink to settle in the tanks.
13. The printer will automatically recognize the refilled ink tanks and start the ink charging process. This may take a few minutes.
14. Once the ink charging process is complete, you can resume printing.
For more detailed instructions and illustrations, please refer to the User's Guide provided with the printer.
Add New Comment