User Manual Q&AAnswer
Oct 31, 2024 - 01:48 AM
Installation of the POWAWINI POGFCI-1P Weather Tamper Resistant Receptacle is straightforward and can be done by following the user manual provided with the product. Here is a step-by-step guide:
1. Before starting the installation, ensure that the power to the circuit is turned off at the circuit breaker.
2. Remove the existing receptacle or electrical box cover plate.
3. Connect the wires from the electrical box to the corresponding terminals on the receptacle. The black (hot) wire should be connected to the brass-colored terminal, the white (neutral) wire to the silver-colored terminal, and the green or bare copper wire to the green grounding xxxx .
4. Carefully insert the receptacle into the electrical box, making sure the wires are not pinched or damaged.
5. Use the provided mounting screws to secure the receptacle to the electrical box.
6. Attach the weatherproof cover if included with your model. Follow the manufacturer's instructions for proper installation of the cover.
7. Once the receptacle is securely installed, turn the power back on at the circuit breaker.
It is important to note that if you are not experienced with electrical work, it is recommended to hire a qualified electrician for installation to ensure safety and compliance with local electrical codes. Always refer to the user manual for specific instructions and guidelines provided by the manufacturer.
Add New Comment