Answer
Oct 31, 2024 - 01:42 AM
To install the BESTTEN USP-2A-20-10PKW Non-Tamper Resistant Outlet, please follow these steps:
1. Ensure that the power is turned off before attempting to install the outlets. This is crucial for your safety.
2. Review the provided installation instructions and familiarize yourself with the local electrical codes. It is important to follow these guidelines to ensure a safe and proper installation.
3. Connect the wires to the appropriate terminals on the outlet. Typically, the black (hot) wire connects to the brass-colored terminal, the white (neutral) wire connects to the silver-colored terminal, and the green or bare copper (ground) wire connects to the green xxxx terminal. Make sure to tighten the terminal screws securely.
4. Once the wires are connected, securely mount the outlet in the electrical box. Use the provided screws to attach the outlet to the box. Ensure that the outlet is level and flush with the wall surface.
5. Double-check all the connections and ensure that they are tight and secure.
6. Turn the power back on at the circuit breaker or fuse box.
7. Test the outlet for functionality by plugging in a device or using a simple electrical tester. If the outlet is functioning correctly, it should provide power to the connected device.
Please note that while these instructions provide a general overview of the installation process, it is always recommended to consult a qualified electrician for assistance, especially if you are unfamiliar with electrical work or local electrical codes. Safety should be the top priority when working with electrical components.
Add New Comment