User Manual Q&AAnswer
Oct 31, 2024 - 01:12 AM
Installation of the DEWENWILS Tamper Resistant Receptacle Outlet is relatively straightforward, but it is important to follow the provided instructions and consult a qualified electrician if you are unsure about any steps. Here is a general guide on how to install the outlet:
1. Turn off the power: Before starting the installation, turn off the power to the electrical circuit you will be working on. This can be done by switching off the corresponding circuit breaker in your electrical panel.
2. Remove the old outlet: If you are replacing an existing outlet, carefully remove it from the electrical box by unscrewing the mounting screws and disconnecting the wires. Take note of the wiring configuration for reference during the installation of the new outlet.
3. Prepare the electrical box: Ensure that the electrical box is in good condition and securely mounted. If necessary, make any repairs or adjustments before proceeding.
4. Connect the wires: Connect the wires from the electrical box to the corresponding terminals on the DEWENWILS Tamper Resistant Receptacle Outlet. Typically, the black (hot) wire connects to the brass or gold-colored terminal, the white (neutral) wire connects to the silver-colored terminal, and the green or bare copper wire connects to the green grounding xxxx . Use wire connectors or terminal screws to secure the connections.
5. Secure the outlet: Carefully insert the outlet into the electrical box, ensuring that the wires are neatly tucked inside. Use the provided mounting screws to secure the outlet to the electrical box.
6. Test the outlet: After the installation is complete, turn the power back on and test the outlet using a reliable electrical device. Ensure that it is functioning correctly and providing power.
Please note that these instructions are a general guide, and it is essential to refer to the specific instructions provided with the DEWENWILS Tamper Resistant Receptacle Outlet for accurate installation steps. Additionally, always follow local electrical codes and regulations during installation to ensure safety and compliance.
Add New Comment