User Manual Q&AAnswer
Oct 31, 2024 - 12:45 AM
To connect the Manhattan 178488 CCD Barcode Scanner to your computer, follow these steps:
1. Ensure that your computer is powered on and running.
2. Locate the USB cable that came with the barcode scanner. This cable is used for connecting the scanner to your computer.
3. Connect one end of the USB cable to the USB port on the barcode scanner.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Wait for your computer to recognize the barcode scanner. It may take a few moments for the necessary drivers to install.
6. Once the scanner is recognized, you can start using it for barcode scanning.
For more detailed instructions and troubleshooting tips, refer to the Quick Guide provided with the Manhattan 178488 CCD Barcode Scanner. The Quick Guide contains step-by-step instructions and illustrations to help you with the setup process.
Please note that the specific steps may vary depending on your computer's operating system and configuration. If you encounter any issues during the setup process, refer to the troubleshooting section in the Quick Guide or consult the product manual for further assistance.
Add New Comment