User Manual Q&AAnswer
Oct 31, 2024 - 12:26 AM
To set up the EPSON DS-570W Document Scanner for wireless scanning, please follow these steps:
1. Ensure that your computer and the scanner are connected to the same wireless network.
2. Turn on the scanner and wait for it to initialize.
3. On your computer, open the scanning software provided by Epson. If you haven't installed it yet, refer to the User's Guide for instructions on how to install the software.
4. In the scanning software, locate the option to select the scanner. It may be labeled as "Scanner," "Source," or something similar. Click on this option.
5. A list of available scanners should appear. Look for the DS-570W scanner and select it.
6. Once the scanner is selected, you may need to configure the wireless settings. Look for an option like "Wireless Setup" or "Network Settings" in the scanning software. Click on it.
7. Follow the on-screen instructions to connect the scanner to your wireless network. You may be prompted to enter your network name (SSID) and password.
8. After successfully connecting the scanner to your wireless network, close the wireless setup window.
9. You should now be able to start scanning wirelessly. Place your document in the scanner's document feeder or on the scanner glass, depending on the type of document you are scanning.
10. In the scanning software, choose the desired scan settings such as resolution, file format, and destination folder.
11. Click on the "Scan" or "Start" button to initiate the scanning process. The scanned document will be sent wirelessly to your computer and saved in the specified destination folder.
Please note that the exact steps may vary slightly depending on the scanning software version and operating system you are using. Refer to the User's Guide for more detailed instructions and troubleshooting tips specific to your scanner model.
Add New Comment