User Manual Q&AAnswer
Oct 31, 2024 - 12:14 AM
To connect the Opticon OPN-2004 Laser Barcode Reader to your device, please follow these steps:
1. Ensure that your device has Bluetooth capabilities and is compatible with the OPN-2004. Refer to the device's user manual or specifications to confirm compatibility.
2. Turn on the OPN-2004 by pressing and holding the power button until the LED indicator lights up.
3. On your device, go to the Bluetooth settings and enable Bluetooth.
4. Press and hold the scan button on the OPN-2004 until the LED indicator starts blinking.
5. On your device, search for Bluetooth devices. The OPN-2004 should appear in the list of available devices.
6. Select the OPN-2004 from the list to initiate the pairing process.
7. If prompted, enter the PIN code "0000" (four zeros) to complete the pairing process.
8. Once the pairing is successful, the LED indicator on the OPN-2004 will stop blinking and remain solid.
9. Open a barcode scanning application or any application that requires barcode input on your device.
10. Start scanning barcodes by aiming the OPN-2004's laser at the barcode and pressing the scan button.
Please note that the specific steps may vary slightly depending on your device's operating system and Bluetooth settings. For more detailed instructions, please refer to the Quick Setup Guide provided with the Opticon OPN-2004 Laser Barcode Reader.
Add New Comment