User Manual Q&AAnswer
Oct 30, 2024 - 11:19 PM
Calibration is an important process to ensure the accuracy of your VEVOR Electronic Price Computing Scale. Here are the steps to calibrate the scale:
1. Prepare for Calibration: Ensure that the scale is placed on a stable and level surface. Make sure there are no objects or weight on the scale.
2. Access the Calibration Mode: Turn on the scale by pressing the power button. Once the scale is powered on, press and hold the "Calibration" button for a few seconds until the scale enters calibration mode. The display should show "CAL" or a similar indicator.
3. Place Calibration Weight: Obtain a known calibration weight that matches the desired calibration value. The weight should be within the scale's capacity range. Place the calibration weight gently and accurately on the scale's weighing platform.
4. Initiate Calibration: Once the calibration weight is placed, press the "Enter" or "OK" button to initiate the calibration process. The scale will start calibrating and adjusting its internal settings based on the calibration weight.
5. Follow On-Screen Instructions: During the calibration process, the scale may display prompts or instructions on the screen. Follow these instructions carefully to complete the calibration process. It may involve removing and reapplying the calibration weight or confirming the calibration value.
6. Calibration Confirmation: Once the calibration process is complete, the scale will display a confirmation message or indicator. This indicates that the scale has been calibrated successfully.
7. Exit Calibration Mode: To exit the calibration mode, press the "Calibration" button again or simply power off the scale. The scale will return to its normal weighing mode.
8. Test the Scale: After calibration, it is recommended to test the scale's accuracy by weighing known items of different weights. Compare the scale's readings with the expected weights to ensure accurate measurements.
9. Record Calibration Details: It is good practice to record the calibration details, including the calibration weight used, date, and any other relevant information. This record can serve as a reference for future calibration or troubleshooting.
Note: The specific calibration process may vary slightly depending on the model and firmware version of your VEVOR Electronic Price Computing Scale. For detailed instructions and any specific requirements, refer to the user manual provided with your scale.
Add New Comment