Answer
Oct 30, 2024 - 10:42 PM
To connect the Plustek A255 Network Document Scanner to your computer, you have two options: Ethernet (RJ45) cable or wireless network connection.
1. Ethernet Connection:
- Connect one end of the Ethernet cable to the scanner's Ethernet port.
- Connect the other end of the Ethernet cable to your computer's Ethernet port or to a network switch/router.
- Ensure that the scanner and your computer are on the same network.
2. Wireless Connection:
- Configure Wi-Fi and Time-Zone settings on the scanner:
- Tap on "Configurations" > "System Settings" > "More Settings..."
- Adjust Wi-Fi and Date & time settings.
- Connect the scanner to your wireless network:
- Tap on "Configurations" > "System Settings" > "More Settings..."
- Configure Wi-Fi settings and enter your network credentials.
- Ensure that your computer is connected to the same wireless network.
For more detailed instructions and troubleshooting tips, please refer to the Plustek A255 Network Document Scanner Quick Start Guide.
Add New Comment