Answer
Oct 30, 2024 - 10:33 PM
To test the GFCI function of the ELEGRP G20 Outlet Grounded GFCI Adapter, follow these steps:
1. Locate the "Test" button on the adapter. It is usually labeled and easily accessible.
2. Ensure that the G20 adapter is plugged into a functioning electrical outlet.
3. Press the "Test" button firmly. This simulates a ground fault.
4. If the GFCI is functioning correctly, the power to the connected device should be interrupted, and it should turn off.
5. After testing, press the "Reset" button on the adapter to restore power to the connected device.
It is important to regularly test the GFCI function of the adapter to ensure it is providing proper protection against ground faults. If the GFCI does not trip or reset properly during the test, it may indicate a malfunction, and the adapter should be replaced.
Please refer to the user manual for specific instructions and illustrations related to testing the GFCI function of the ELEGRP G20 Adapter.
Add New Comment