How do I install and mount the Electronic Specialties 329 Small Engine Tachometer? (ELECTRONIC SPECIALTIES 329 Small Engine Tachometer Specifications DataSheet)

Answer

manuals.plus

Oct 30, 2024 - 10:02 PM

To install and mount the Electronic Specialties 329 Small Engine Tachometer, please follow these steps:

1. Determine the mounting location: Choose a suitable location on your small engine where the tachometer can be easily viewed during operation. Ensure that the tachometer is mounted securely and does not obstruct any moving parts.

2. Clean the mounting surface: Use a clean cloth or alcohol wipe to clean the mounting surface on your small engine. This will ensure a strong adhesive bond when using the included Velcro tape.

3. Attach the Velcro tape: Peel off the backing from the Velcro tape and firmly press one side onto the back of the tachometer. Peel off the backing from the other side of the Velcro tape and press it onto the cleaned mounting surface of your small engine.

4. Secure the tachometer: Press the tachometer firmly against the Velcro tape to ensure a secure attachment. Make sure it is positioned in a way that allows for easy viewing of the display.

5. Connect the tachometer: Locate the spark plug wire of your small engine. Wrap the included zip tie around the spark plug wire and thread it through the small hole on the side of the tachometer. Tighten the zip tie to secure the connection.

6. Power on the tachometer: Once the tachometer is securely mounted and connected, press the power button to turn it on. The display should light up, showing the current RPM reading.

Please refer to the instruction manual provided with the Electronic Specialties 329 Small Engine Tachometer for more detailed installation and mounting instructions.