User Manual Q&AAnswer
Oct 30, 2024 - 06:05 AM
Installing the NineLeaf HY-GFCI-BK20A Outlet GFI Dual Receptacle is a relatively straightforward process. Here are the step-by-step instructions:
1. Turn off the power supply to the outlet: Before starting the installation, make sure to turn off the power supply to the outlet at the circuit breaker or fuse box.
2. Remove the existing outlet cover and disconnect the wires: Remove the cover plate of the existing outlet and disconnect the wires from the terminals. Take note of the wire connections for reference during the installation of the new receptacle.
3. Connect the wires to the corresponding terminals on the NineLeaf HY-GFCI-BK20A Outlet: Connect the wires to the appropriate terminals on the new receptacle. Typically, the black (hot) wire connects to the brass-colored terminal, the white (neutral) wire connects to the silver-colored terminal, and the green or bare copper wire connects to the green grounding xxxx .
4. Secure the outlet in place using the provided mounting screws: Once the wires are securely connected, carefully position the NineLeaf HY-GFCI-BK20A Outlet in the electrical box and secure it in place using the provided mounting screws. Ensure that the receptacle is flush against the wall.
5. Turn the power supply back on: After the installation is complete, turn the power supply back on at the circuit breaker or fuse box.
6. Perform a self-test: To ensure proper functionality, perform a self-test on the NineLeaf HY-GFCI-BK20A Outlet. Press the "TEST" button on the front of the receptacle. The "RESET" button should pop out, indicating that the GFCI is functioning correctly.
It's important to note that electrical work should be done by a qualified electrician if you are unsure or uncomfortable with the installation process. Always follow the manufacturer's instructions and consult a professional if needed.
Add New Comment