User Manual Q&AAnswer
Oct 30, 2024 - 04:27 AM
To connect the Electronic Specialties 194 Super Relay Tester to the relay being tested, follow these steps:
1. Ensure that the tester is powered off and disconnected from the vehicle's battery.
2. Identify the relay that needs to be tested.
3. Locate the appropriate connector type on the tester, which is solder-type.
4. Align the connector with the corresponding pins on the relay.
5. Firmly plug the connector into the relay, ensuring a secure and stable connection.
6. Once the connection is established, you can proceed with the testing process.
For more detailed instructions and illustrations, please refer to the user manual provided with the Electronic Specialties 194 Super Relay Tester.
Add New Comment