User Manual Q&AAnswer
Oct 30, 2024 - 04:08 AM
To install the AIDA G1900-WH-6 Indoor Receptacle GFCI, follow these steps:
1. Ensure that you have turned off the power to the circuit you will be working on at the circuit breaker or fuse box.
2. Remove the existing outlet or receptacle from the electrical box by unscrewing the mounting screws and disconnecting the wires.
3. Connect the line (incoming power) and load (outgoing power) wires to the appropriate terminals on the GFCI receptacle. The line wires are typically black or red, while the load wires are usually white or gray.
4. Use wire connectors to secure the wire connections, ensuring that there are no loose or exposed wires.
5. Carefully insert the GFCI receptacle into the electrical box, making sure that the wires are not pinched or damaged.
6. Secure the GFCI receptacle to the electrical box using the provided mounting screws.
7. Install the wall plate cover over the GFCI receptacle, aligning the xxxx holes with the mounting screws on the receptacle.
8. Turn on the power at the circuit breaker or fuse box.
9. Test the GFCI receptacle by pressing the "Test" button. The outlet should trip, cutting off power. Press the "Reset" button to restore power. If the GFCI does not trip when tested, consult the manufacturer's instructions or replace the unit.
Please note that these are general installation guidelines, and it's important to follow the specific instructions provided in the AIDA G1900-WH-6 Indoor Receptacle GFCI user manual and comply with local electrical codes. If you are unsure about the installation process, it is recommended to seek the assistance of a qualified electrician.
Add New Comment