Answer
Oct 30, 2024 - 04:03 AM
To install the AH Lighting Tamper Resistant Duplex Receptacle, follow these step-by-step instructions:
1. Turn off power to the outlet at the circuit breaker to ensure safety during the installation process.
2. Remove the existing receptacle cover by unscrewing it from the wall.
3. Unscrew and disconnect the old receptacle from the electrical wiring. Take note of the wire connections and their corresponding colors.
4. Connect the wires to the new receptacle following the color-coded guidelines. Typically, the black wire connects to the brass or gold-colored xxxx , the white wire connects to the silver-colored xxxx , and the green or bare copper wire connects to the green xxxx or grounding terminal.
5. xxxx the new receptacle into place, ensuring it is securely attached to the electrical box.
6. Turn the power back on at the circuit breaker and test the receptacle by plugging in a known working device.
It is important to note that the installation of the AH Lighting Tamper Resistant Duplex Receptacle should be done by a qualified electrician in accordance with local electrical codes and regulations. If you are unsure or uncomfortable with the installation process, it is recommended to seek professional assistance.
Please refer to the product manual provided with the AH Lighting Tamper Resistant Duplex Receptacle for any specific instructions or guidelines related to the installation process.
Add New Comment