Answer
Oct 30, 2024 - 03:53 AM
To connect the VOLCORA V-LBPTZ-A1 Thermal Label Printer to your computer, follow these steps:
1. Ensure that your computer is powered on and running the appropriate operating system (Windows, Linux, or Mac).
2. Locate the USB connection cable included in the box.
3. Connect one end of the USB cable to the USB port on the back of the printer.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the printer is connected, it should be automatically recognized by your computer.
6. If prompted, install the necessary printer driver. The driver can be found in the box or downloaded from the VOLCORA website.
7. Follow the on-screen instructions to complete the driver installation process.
8. Once the driver is installed, you should be able to start using the printer with your computer.
If you encounter any issues during the connection process, refer to the user manual for troubleshooting steps or contact VOLCORA's customer support for further assistance.
Add New Comment