Answer
Oct 30, 2024 - 03:33 AM
To set the temperature on the Tiger PIF-A30U Micom Electric Water Boiler, please follow these steps:
1. Make sure the water boiler is plugged into a power outlet and turned on.
2. Press the "Menu" button on the control panel to enter the menu mode.
3. Use the "+" and "-" buttons to navigate through the menu options until you reach the temperature setting.
4. Once you have selected the temperature setting, press the "Set" button to enter the temperature adjustment mode.
5. Use the "+" and "-" buttons to increase or decrease the temperature to your desired level.
6. After setting the temperature, press the "Set" button again to confirm and save the new temperature setting.
7. The water boiler will now heat the water to the selected temperature and maintain it until you change the setting or turn off the boiler.
For more detailed instructions and illustrations, please refer to the operating instructions manual provided with the Tiger PIF-A30U Micom Electric Water Boiler. You can access the manual by clicking on the link provided above.
Add New Comment